LAB 1.7 Backup and Restore Configuration

Postingan kali ini saya akan memberikan cara untuk konfigurasi backup dan restore di MikroTik

Tujuan

1. Belajar untuk mengetahui cara backup di MikroTik
2. Belajar untuk mengetahui cara restore di MikroTik
3. Belajar untuk mengetahui perbedaan .backup dan .rsc di MikroTik

Bahan yang diperlukan: 

     1. PC/Laptop

     2. Kabel UTP

     3. MikroTik Router Board

     4. Jaringan Wireless

Langkah - langkah

    Sebelum melakukan konfigurasi backup dan Restore, Konfigurasikan terlebih dahulu MikroTik Router dengan LAB 1.6

Backup dan Restore tanpa password

1. Klik Backup, lalu Kosongkan nama dan password, kemudian Klik Backup

2. Pindahkan Mikrotik.backup ke client

3. Hapus Mikrotik.backup yang ada di RouterBoard

4. Klik System, lalu klik Reset Configuration

5. Ceklis No Default, lalu Klik Reset Configuration

6. Buka Winbox, dan klik Connect

7. Klik Files, pindahkan Mikrotik yang ada di client ke RouterBoard, lalu Klik Restore

8. Kemudian klik Restore, dan Reboot

9. Buka Winbox, lalu klik Connect

10. Buka Interfaces untuk mengecek koneksi internet

11. Sudah Selesai, hapus Mikrotik.backup agar kembali seperti semula

Backup dan Restore menggunakan password

1. Klik Backup, isi nama dan password, lalu klik Backup

2. Pindahkan <username>.backup ke client, lalu hapus yang ada di MikroTik RouterBoard

3. Klik System, lalu Klik Reset Configuration

4. Ceklis no default, lalu Klik Reset Configuration

5. Buka Winbox, lalu Klik Connect

6. Klik Files, pindahkan <username>.backup ke RouterBoard, lalu Klik Restore

7. Kemudian Klik Restore

8. Terlihat Seperti ini berarti ada kesalahan

9. Jangan lupa isi password untuk backup yang diberi password, lalu klik Restore, dan Reboot

10. Buka Winbox, Connect dengan Mac Address

11. Buka Wireless, untuk mengecek koneksi internet

12. Klik Files, remove <username>.backup untuk mengembalikan seperti semula

Backup dan Restore menggunakan CLI

1. Ketikkan > system backup save

2. Ketikkan file print, untuk check Backup yang ada di MikroTik RouterBoard

3. Klik Files, lalu remove backup yang ada di MikroTik RouterBoard

4.Ketikkan file print, untuk check kembali file Mikrotik.backup yang sudah dihapus

Backup dan Restore dengan ekstensi .rsc

1. Ketikkan > export file=<username>, untuk mengganti ekstensi menjadi .rsc

2. Klik Files, drag <username>.rsc, lalu hapus <username>.rsc yang ada di MikroTik RouterBoard

3.Klik System, lalu Klik Reset Configuration

4. Ceklis no default, lalu Klik Reset Configuration

5.Klik kanan pada <username>.rsc di client, lalu klik Open With...

6. Buka <username>.rsc dengan Notepad

7. Bebas ganti Ip pada <username>.rsc

8. Klik File, lalu Klik Save

9. Buka Winbox, connect dengan Mac Address

10. Klik Files, lalu pindahkan <username>.rsc ke MikroTik RouterBoard

11. Ketikkan > file print, untuk check <username>.rsc

12. Ketikkan > import file-name=<username>.rsc

13. Ketikkan ip address print, untuk check IP di MikroTik RouterBoard

Terima Kasih

Semoga Bermanfaat

Read More

LAB 1.4 (Management User, Management Service, Identity) MikroTik at Router Board

I post this time will share how to do Management User, Management Service, and Identity MikroTik at RouterBoard

Purpose

• Learning to know how to do Management User MikroTiik at RouterBoard
• Learning to know how to do Management Service MikroTik at RouterBoard
• Learning to know how to do Identity at RouterBoard

Materials

• RouterBoard
• Laptop or PC
• Cable UTP
• Power cable RouterBoard

Steps

1.  Click Network and Sharing Center to Open Network and Sharing Center

2.  Click change adapter settings

3. Right Click at VirtualBox Host-Only, next click Disable, and  Wi-Fi is also Disable

4. Open WinBox click symbol "...", then click Mac Address, next write user login "admin", and click connect

5.  Click System, then click Reset Configuration to be able Default Configuration

6. Open Network and Sharing center, to check IP Address Ethernet

7. Right-click at Ethernet Adapter, then click Properties

8.  Click IP Version 4 (TCP/IPv4), then click Properties to show IP Address Client, and Edit IP Address appropriate with RouterBoard, after that click OK

9. Open WinBox, click symbol "...", then click IP Address to connect with IP Address

10. Click System, then click Identity to show Note Identity, and then Edit Note Identity to change Note in WinBox, if you have finish click apply and OK, Example like the picture below

11. Click System, next click User to show User List, and then Click Symbol "+" to create New User, if you have finish click apply and ok

12.  Double-click at user admin, then replace IP Address WinBox with IP Address Client which appropriate in Router Board, if you have finish click Apply and Ok

13. Connect with IP Address, Login with New username which already created, then click Connect

14. This is the display using Username Ferdinan, Example like the picture below

15. Open WinBox again, and Login with Username admin, then click Connect

16. This is the display using Username admin, example like the picture below

17. Next click System, click Services to Open IP Service List, and then Double-click telnet, change with port 8080, if you have finish click Apply and Ok

18. Open Control Panel, click Programs and Features, then Click Turn Windows features on or off, click checkbox Telnet client to active Telnet Client, if you have finish click Ok

19. Open Command Prompt, Write the command to Open Telnet in Command Prompt

20. Login with Username admin in Telnet Command Prompt

21. This is the display using Username admin at Command Prompt, Example like the picture below

22. Open Command Prompt again, write the command to Open Telnet in Command Prompt

23. Login with Username Ferdinan in Telnet Command Prompt

24. This is the display using Username Ferdinan at Command Prompt, Example like the picture below 

25. Click System, click Services to Open IP Service List, and then Double-click winbox, change with port 8291, if you have finish click Apply and Ok

26.Open WinBox, and Login with Username admin, then click Connect 

27. This is the display using Username admin, example like the picture below 

28. Open WinBox again, connect with IP Address, Login with Username Ferdinan, then click Connect 

29. This is the display using Username Ferdinan, Example like the picture below 

Video Tutorial

 

Thank You..

Hope it is useful.. 

Read More